Default Internal Disk Configuration For A Newly Installed System; Checking The Current State Of The Internal Disk Subsystem - NEC Express5800/ftServer Administrator's Manual

Default Internal Disk Configuration for a Newly Installed System

The Linux operating system is installed on the sda/sdd pair of SAS (SATA) disks.
See User Guide (Setup) for configuration of internal disk.
N O T E
The RAID array is not deterministic.

Checking the Current State of the Internal Disk Subsystem

The /proc/scsi/scsi file displays the current state of the internal disk subsystem.
It shows all of the disks and their names and states, as well as additional information.
This example shows a system with two SAS (SATA) disks.
Setting Up Internal Disk Storage
Setting Up the ftServer System
5-7