NEC Express5800/ftServer Administrator's Manual page 155

serial ports
data rate, 2-6
flow control, 2-6
setting up the Linux operating system, 2-3
shells
debug, 9-3
GRUB, 2-6
simplex, 8-31
LED indicator, 8-28
SNMP (Simple Network Management
Protocol), 8-1
See also ftlSNMP and Net-SNMP
basic Net-SNMP commands, 8-10
concepts, 8-8
configuring for remote service
management, 8-17
configuring for service management, 8-6
configuring to start at system
initialization, 8-6
fault-tolerant operation, 8-15
initial testing, 8-27
managing, 8-18
managing hardware, 8-20
testing a configuration, 8-19
testing Ethernet ports, 8-23
traps.See traps
view of a network, 8-14
snmpset command, 8-20
snmptrapd, 8-18
snmpusm command, 8-7
snmpwalk, 8-19
software
optional components, 2-6
SRA-ftLinux-MIB, 8-26
description, 8-2
GET operations, 8-32
OID values and properties, 8-32
SET operations, 8-32
ftsmaint command
identify, 7-3
storage devices
definition, 5-9
subagents
log files, 8-17
system
administration, 1-1, 1-2
backup, 5-26
boot
Linux rescue mode, 2-15
normal sequence, 9-2
problems, 9-1, 9-3
devices
controlling, 7-12
initialization, 2-6
log messages, 9-6
pedestal and rack orientation, 2-4
system clock, 5-33
system dumps, 7-13
systems
firmware, 2-2, 2-7
T
testing
Ethernet ports, 8-23
SNMP configuration, 8-19
ticks (clock), losing message, 5-33
time zone
configuring, 5-32
traps
filtering
activating, 8-33
deactivating, 8-33
description, 8-33
examples, 8-34
verifying, 8-18
troubleshooting, 1-3
ftServer systems, 1-3, 9-1
U
udev command, 6-1
udevinfo command, 6-3
umount command, 6-3
uname command, 2-4
up2date agent, 4-4
updating
BMC firmware, 3-5
system BIOS, 3-1
updating the Linux operating system, 4-1
upgrading
Express Builder, 1-2, 4-6
procedure, 4-6
Linux operating system, 1-2, 4-1
pre-upgrade checklist, 4-3
recovery from an upgrade, 4-8
upgrading the operating system, 4-2
USB devices
during system installation, 2-5
Index
Index-5