Initial SNMP Testing
Table 8-3. Reason Codes, Names, and Definitions (Page 2 of 2)
Code
Reason
13
FIRMWARE_PROM_ERROR
14
AUTOBURN_DISABLED
16
PRIMARY
17
SECONDARY
GET and SET Operations for ftlSNMP MIB Objects
See the SRA-ftLinux-MIB.txt file for information on objects that have GET and SET
operations.
Table 8-4
Table 8-4. Set Operations Currently Implemented in ftlSNMP
ftcCpubdBurnFirmware
ftcCpubdClearMTBF
ftcCpubdInitiateBringDown
ftcCpubdInitiateBringUp
ftcCpubdSetCPUBoardPriority
ftcCpubdSetMTBFThreshold
ftcCpubdSetMtbfType
ftcIobdClearMTBF
ftcIobdInitiateBringDown
SRA-ftLinux-MIB OID Values and Properties
The SRA-ftLinux-MIB file contains all ftlSNMP defined object identifiers, and
associated operation classes and properties, with some notes inserted to assist you.
You can grep through the SRA-ftLinux-MIB.txt file for information about OID values
and properties or open it with an editor or browser to view and search for information.
The default installation places SRA-ftLinux-MIB at
/opt/ft/mibs/SRA-ftLinux-MIB.txt.
8-32
Express5800/ftServer: System Administrator's Guide for the Linux Operating System
Definition
Could not write to the firmware PROM.
Cannot match a new enclosure's BIOS or
firmware with that of the existing enclosure.
With duplex devices, this indicates that the
specific device is primary in the pair.
With duplex devices, this indicates that the
specific device is secondary in the pair.
lists the operations.
Operation
ftcIobdInitiateBringUp
ftcIobdSetMTBFThreshold
ftcIobdSetMtbfType
ftcEtherClearMTBF
ftcEtherSetMTBFThreshold
ftcEtherSetMtbfType
ftcScaClearMTBF
ftcScaSetMTBFThreshold
ftcScaSetMtbfType