Setup > Logs; Setup > Alarms - Navman TRACKFISH 6500 Installation And Operation Manual

17-7 Setup > Logs
Press one or more times until the
Setup menu is displayed, then select Logs:
17-8 Setup > Alarms
Press one or more times until the
Setup menu is displayed, then select
Alarms:
TRACKFISH 6500 Installation and Operation Manual
The values can be reset independently of each
other. These log values are saved when the unit
is turned off.
Reset trip dist
This resets the trip distance to zero.
Reset total dist
This option resets the total distance to zero.
Reset engine hours
Use this option to reset the engine hours to
zero. This can be useful after an engine service
or to count the engine hours between service
intervals.
For the XTE, Fish and Loss of DGPS fix
alarms, select to turn the alarm on or select
to turn the alarm off. For the other alarms,
enter a trigger value to turn the alarm on. The
alarm will sound each time the alarm value
passes the trigger value. For example, the
Danger alarm will sound if the boat comes
closer to a danger waypoint than the trigger
value and the Anchor alarm will sound if the
boat moves by more than the trigger value. To
turn these alarms off, enter a trigger value of
0 (zero).
Icons for alarms that are on can be displayed in
the data header (see section 2-7-3). An alarm
icon is normally black and turns red when the
alarm sounds.
NAVMAN
65