Setup > Track; Setup > Logs - Navman TRACKFISH 6600 Installation And Operation Manual

15-6 Setup > Track
Press MENU one or more times until the Setup
menu is displayed, then select Track:
Tracking records and displays the boat's course
on the chart (see section 3-6). Five different
tracks can be recorded: track 1 has up to 2000
points and tracks 2, 3, 4 and 5 have up to 500
points each.
Record
Off: The TRACKFISH stops recording
a track.
1 to 5 (select a track number): The
TRACKFISH starts recording the boat's
course into the selected track.
Display
Off: No track is shown on the chart.
1 to 5 (select a track number): The
selected track is shown on the chart.
15-7 Setup > Logs
Press MENU one or more times until the Setup
menu is displayed, then select Logs:
TRACKFISH 6600 Installation and Operation Manual
Plotting Interval
The options are Distance or Time.
Distance
Select the distance plotting interval: 0.01, 0.05,
0.1, 0.5, 1.0, 2.0, 5.0 or 10.0 distance units.
Time
Select the time plotting interval: 1, 5, 10 or 30
seconds or 1 minute.
Memory used
The percentage of memory used in the track
being recorded.
Tip: Use the user card display to check the
number of points recorded in each track (see
section 11).
Send track
This option is included for compatibility with
older units. For information, see your Navman
dealer.
Delete track
The data in the track selected for Record (see
above) is deleted.
The values can be changed independently of each
other. These log values are saved when the unit
is turned off.
Reset trip dist
This resets the trip distance to zero.
Reset total dist
This option resets the total distance to zero.
Reset engine hours
Use this option to reset the engine hours to zero.
This can be useful after an engine service or to count
the engine hours between service intervals.
NAVMAN
57