Navigation: Chart; Introduction To Navigating - Navman TRACKFISH 6500 Installation And Operation Manual

2-7-3 Data header
The chart, sonar and highway displays can
show data at the top of the display.
The data header for each display can be
different. To change the data header for a
display:
1 Go to the display, press
Data header.
2 To turn the data header off or on:
i Select Data.
ii Select or
3 To choose the size of the data:
i Select Size.
ii Select Small, Medium or Large.
2-7-4 Compass
The chart, sonar and highway displays can
show a compass at the top of the display.
The compass always shows the boat's course
over ground (COG), a red symbol in the middle.
When the boat is navigating to a point, the
compass also shows bearing to the destination
(BRG), a black symbol.
In this example, BRG is [###]° and COG is [###]°.

3 Navigation: Chart

The chart display shows the chart, the boat's position course and navigation data.

3-1 Introduction to navigating

The TRACKFISH has two ways of navigating, going straight to a point or following a route.
18
and select
.
NAVMAN
4 To change the data displayed:
i Select Data setup.
ii Change a data field:
a Press the cursor keys to highlight
the field.
b Press
data items.
c Select a data item that is
available on your system or select
None to leave the field empty.
iii Repeat the above step to set the other
data fields.
Tip: If all fields in a line are None then
the line will not be displayed and the data
header will take less space on the display.
5 Press to return to the display.
To turn the compass off or on:
1 Press and select Data header.
2 Set Compass to
TRACKFISH 6500 Installation and Operation Manual
to display a menu of
or .