Navigation: Routes; Routes Display - Navman TRACKFISH 6500 Installation And Operation Manual

5-2-6 Deleting all waypoints
1 In the waypoints display and press
and select Delete all.
Select Yes to confirm.
2
5-2-7 Changing a waypoint's data
To change the waypoint data when it is
displayed in a window:
1 Select the data to change.
Press .
Use the cursor keys to change the data.
Press .
2 If necessary, repeat the above step to
change other data.
Select Save.
3

6 Navigation: Routes

A route is a list of waypoints that the boat
can navigate along. Routes can be created,
changed and deleted.
The TRACKFISH can have up to 25 routes. Each
route can have up to 50 waypoints.
A route can:
Start and stop at the same waypoint .
Include waypoints more than once.
The TRACKFISH can navigate along a route in
either direction. Waypoints on the route can
be skipped.

6-1 Routes display

The routes display is a list of the routes that
have been entered, each with route name, start
waypoint, end waypoint, number of legs and
total distance.
To go to the routes display, press
Other, then select Routes.
If there are more routes than will fit on the
display, press or
page at a time.
TRACKFISH 6500 Installation and Operation Manual
, select
to scroll up or down a
5-2-8 Sort Waypoints
To change how the waypoints list is displayed:
and select Sort by.
1 Press
2 Select how to display the list:
Name: In alphabetical order by name.
Icon: Grouped by icon type.
Distance: In order of distance from the
boat.
An arrow at at the top of a column indicates
how the waypoints are sorted.
5-2-9 Navigating to a waypoint
See section 3-1-2.
Routes are a powerful feature when the
TRACKFISH is connected to an autopilot,
allowing the vessel to be automatically guided
along the route.
Warning: Make sure that routes do not
cross land or dangerous water.
NAVMAN
27