Setup
Data Search Mode
The NAVMAN R100 has four individual data
inputs. After making the initial connection to the
NAVMAN R100, or after making any additional
connections, it will be necessary to place the
NAVMAN R100 into data search mode.
Note:
This operation must be completed
when first installing the NAVMAN R100.
Press and hold the
seconds to enter data search mode. The
instrument automatically searches for inputs from
up to 4 attached devices.
AUTO RETURN TO
LAST FUNCTION
8
and
keys for 7
7 SEC
SEARCHES
Operation
Changing Functions
The upper and lower display sections can be
configured to display depth or speed readings.
The remaining functions are dedicated to either
the upper or lower display.
The
key selects functions dedicated to the
upper display. The selection remains in memory
after power down.
DEPTH
TRIP
DISTANCE
SPEED
TRIP
DISTANCE
AVERAGE
SPEED
TRIP
DISTANCE
NAVMAN R100 User Manual