Alarms; Simulate Mode - Navman TRACKFISH 6500 Installation And Operation Manual

2-5 Alarms

When the TRACKFISH detects an alarm
condition, it displays a warning message on
the display, the internal beeper sounds and any
external beepers or lights operate.
Press to clear the alarm. The alarm
will sound again if the alarm condition occurs
again.
The TRACKFISH has user settable alarms (see
section 17-8).

2-6 Simulate mode

In Simulate mode, the TRACKFISH ignores data
from the GPS antenna and other transducers
and sensors and the TRACKFISH generates this
data itself. Otherwise, the TRACKFISH functions
normally.
There are two simulate modes:
• Normal: Allows a user to become familiar
with the TRACKFISH off the water.
• Demo: Simulates a boat moving along a
route and automatically displays different
TRACKFISH functions.
To start and stop Simulate mode, and for more
information, see section 17-14. In simulate
mode, Simulate or Demo flashes at the bottom
of the display.
Warning: Never have Simulate mode
on when the TRACKFISH is navigating on
the water.
TRACKFISH 6500 Installation and Operation Manual
NAVMAN
13