Frymaster 14 Series Operator's Manual page 67

5.5 Manual or End of Day Filtration (MAINT FLTR)
Do not drain more than one frypot at a time into the built-in filtration unit to avoid
overflow and spillage of hot oil that may cause severe burns, slipping and falling.
Ensure that the filter pad or paper is replaced daily to keep the system operating correctly.
1. The fryer MUST be at setpoint temperature.
With the computer OFF press and hold the
FLTR button for three seconds (see Figure
14).
Computer displays fltr menu for three seconds changing to Auto Filter.
2. Press the u(INFO) button (see Figure 15) to scroll to maInT fltr.
3. When the desired selection is displayed press the
continue (see Figure 16).
The screen alternates between man fltr and Yes NO.
(1 yes) button to start the manual filtration process (see
4. Press the
Figure 17).
The heat source is disabled and the system verifies that the pan is in place.
If no pan is in place the computer displays chk pan until a pan is detected. The computer
displays filtering and oil drains from the frypot
Keep all items out of drains. Closing actuators may cause damage or injury.
The computer display changes to scrub vat complete.
NOTICE
The filter pad or paper must be replaced daily.
DANGER
(1 yes) button to
DANGER
5-8
Figure 14
Figure 15
Figure 16
Figure 17