Frymaster 14 Series Operator's Manual page 46

Allow oil to cool to 100°F (38°C) before draining into an appropriate METAL container
for disposal.
When draining oil into an appropriate MSDU or METAL container, make sure the
container will hold at least FOUR gallons (15 liters) or more. Otherwise oil could
overflow and can cause injury.
The drain valve opens and the oil is drained into the MSDU for JIB systems or the filter pan for bulk
system. The computer displays disposing.
Bulk or JIB System: The drain valve remains open and the computer displays Vat empty,
alternating with yes no.
8. With the vat empty, press the
The computer displays oil discarded, alternating with yes no.
9. JIB system: Press the
in MSDU. Skip to step 17.
Bulk system: Press the
in the filter pan.
Referred from Step 6: Press the
Bulk System: The computer displays engage dispose
switch*.
10. Bulk System: Switch the bulk oil system switch to dispose (see
Figure 127).
* If the bulk oil system waste tank is full, the computer displays RTI
TANK FULL. Call the bulk oil waste provider.
11. Bulk System: Press the
The computer displays PAN TO WASTE. The pump transfers the waste oil from the pan to the
bulk oil waste tanks.
The computer displays PAN empty.
12. Bulk System: Pull the filter pan out and ensure the filter pan is empty.
13. Bulk System: Press the
if the pan has oil remaining. The computer will display PAN TO
WASTE.
DANGER
DANGER
(1 yes) button (see Figure 124).
(1 yes) button (see Figure 125). Discarded oil is
(2 no) button (see Figure 126). Discarded oil is
(1 yes) button. Skip to 17.
(1) button (see Figure 128).
(2) button (see Figure 129) to run the pump again
4-28
Figure 124
Figure 125
Figure 126
Figure 127
Figure 128
Figure 129