Frymaster 14 Series Operator's Manual page 42

4.12 Programming Level One
Level one programming is used to enter new products, control when AIF (auto intermittent filtration)
is disallowed, and perform deep clean (boil- out) and high-limit tests.
To enter Level 1 programming mode:
1. With the computer OFF, press the TEMP and INFO buttons
simultaneously (see Figure 97) for THREE seconds until LEVEL 1 is
displayed; a chirp sounds.
The computer displays ENTER Code and sounds an alert.
2. Enter 1234 (see Figure 98).
The computer displays level 1 program for three seconds changing to Product
selection.
3. Press the t and ubuttons (see Figure 99) to scroll between:
a. Product selection
b. aif clock
c. DEEP CLEAN MODE
d. high limit test
e. Fryer setup
4. With the desired selection displayed, press the
chosen menu item (see Figure 100).
4.12.1 PRODUCT SELECTION
1. To add or edit products in the product selection mode see pg. 4-12 ADDING A NEW
PRODUCT ITEM TO THE MENU Steps 4-30.
The submenus under product selection are:
a. Name – Enter full product name limit eight characters (FR FRIES).
b. cook time – Enter cook time (ex. 3:30 as 0330).
c. temp – Enter cook temperature. (ex. 335° as 335).
d. cook id – Enter four (4) letter product ID (ex. CPSY).
e. qual tmr – Enter quality time for hold time (ex. 7:00).
f. DUTY TIME 1 – Enter the seconds into the cook cycle that the first duty alarm
g. DUTY TIME 2 – Enter the seconds into the cook cycle that a second duty alarm
h. aif disable – Enter YES if AIF is to be disabled for specific products.
i. assign btn – Assigns menu items to a specific button for simplified cooking.
See pg. 4-24
See pg. 4-25
See pg. 4-27
See pg. 4-30
See pg. 4-9
(1 yes) button to select
sounds. (ex. 30 seconds- to shake fries).
sounds.
4-24
1 2
3 4
Figure 98
Figure 97
(1234)
Figure 99
Figure 100