Frymaster 14 Series Operator's Manual page 51

Computer displays select product.
3. Use the 3and 4 to scroll through the product list (see Figure 152).
The computer displays the product selected.
4. With a product selected, press the
Figure 153.
The computer displays modify alternating with yes no.
(1 yes) button (see Figure 154) to continue or the
5. Press the
to return to PRODUCT SELECTION.
Computer displays LOAD COMP on left side with 4 or some other numeral on the right. This is
the sensitivity setting recommended for this product.
NOTE: It is highly recommended NOT to adjust this setting, as it could have an
adverse affect on the product.
6. If changing this setting, enter a number between 0-9.
7. Press the u (INFO) button to accept selection (see Figure 155).
(2) button (see Figure 156) three times to exit.
8. Press the
The computer displays OFF.
4.13.2 E-LOG MODE
The E-LOG mode is used to view the ten most recent error codes encountered on the fryer. These
codes are displayed from 1-10 with the most recent displayed first. The time, date and error code are
displayed.
1. Perform steps 1-3 on page 4-32.
Computer displays e-LOG .
(1 yes) button to accept selection (see Figure 157).
2. Press the
3. Use the t and ubuttons (see Figure 158) to scroll through the ten most
recent error codes.
If no errors exist, the computer displays NO ERRORS. Errors are displayed by error code, time
and date. An error code followed by "L" indicates left side of a split vat and "R" indicates right side
(1 yes) button to select a product (see
4-33
Figure 152
Figure 153
(2) button
Figure 154
Figure 155
Figure 156
Figure 157
Figure 158