Frymaster 14 Series Operator's Manual page 37

6. Clean the vat with a scrub brush and when complete press the
button to continue (see Figure 69) or if waste tank is full, the message clears
and the computer displays OFF.
The computer displays engage dispose switch.
7. Switch the bulk oil system switch to dispose (see Figure 70).
If the bulk oil system waste tank is full, the computer displays RTI TANK FULL. Call the bulk
oil waste provider.
8. Press the (1) button to start disposal (see Figure 71).
The computer displays PAN TO WASTE. The pump transfers the waste oil from the pan to the
bulk oil waste tanks.
The computer displays PAN empty when finished.
9. Press the (2) button (see Figure 72) to run the pump again if the pan has
oil remaining; otherwise continue to the next step.
10. Once the pan is empty, press the
Section 4.10.4.4.
The vat is ready to be refilled with oil.
The computer displays Disengage dispose switch.
11. Switch off the bulk oil system using the door switch to the center position
(see Figure 74).
12. Press the (1) button to disengage disposal switch (see Figure 75).
(1) button (see Figure 73) to continue to
4-19
(1 yes)
Figure 69
Figure 70
Figure 71
Figure 72
Figure 73
Figure 74
Figure 75