Messages About The Printer And Other Items (In Alphabetical Order) - Xerox DocuPrint C2100 User Manual

Message
Ready to print
Fuser Unit
Ready to print
Replace Soon
Ready to print
Belt Unit
Ready to print
Replace Soon
Reboot printer
(NNN-NNN)
Replace XXX
Print Cartridge
XXX=Yellow, Magenta, Cyan, or
Black
Replace
Belt Unit
XXX indicates one of the following; the Yellow Toner (Y), Cyan Toner (C), Magenta Toner (M), Black Toner (K), or Fuser Unit.
NNN indicates a numeric value.

Messages About the Printer and Other Items (In Alphabetical Order)

Message
042-700
Overheat
077-912
Push in Tray 1
Cannot Print PDF
Press SET
Check Bypass
Clear Jam
Open & Close
Cover A
Close Cover A
Invalid Feature
Press SET
Invalid Job
Press SET
Limit Reached
Press SET
It is nearly time to replace the fuser unit. Purchase a new fuser unit.
Refer to
• "Replacing the Fuser" (P. 103)
It is nearly time to replace the belt unit. Purchase a new belt unit.
Refer to
• "Replacing the Belt Unit" (P. 109)
The printer is not working correctly due to damage or malfunction. Switch the printer
off and then on. If the error continues, contact our Customer Support Center or your
dealer.
The XXX print cartridge has become empty. Replace the old XXX print cartridge with
a new one.
Refer to
• "Replacing the Print Cartridge" (P. 100)
Time to replace the belt unit. Replace the old belt unit with a new one.
Refer to
• "Replacing the Belt Unit" (P. 109)
The printer internal temperature is too high. Let the printer sit for a short period of
time. The printer resumes printing when the temperature drops. If the error
continues, contact our Customer Support Center or your dealer.
Tray 1 is pulled out. Set Tray 1 into the correct position.
The PDF file may be print-prohibited.
PDF files that are prohibited to print cannot be printed on the printer. Press the
<Eject/Set> button to cancel the print job.
Paper is jammed inside the bypass tray. Remove the jammed paper. Open and close
the front cover.
Refer to
• "5.1 When Paper Jams" (P. 82)
The front cover is open. Close the front cover.
The user is not registered to print in color when using an authentification function.
Contact the administrator.
When the configuration of the printer on the printer driver does not conform to the
printer you are using, this message appears.
• Press the <Cancel Job> button to cancel the print job.
• Make sure that the configuration of the printer on the printer driver conforms to the
printer you are using.
The user has exceeded the limit on the number of pages that can be printed when
using an authentification function. Contact the administrator.
Condition/Reason/Action
Condition/Reason/Action
95
5.4 Error Messages