Xerox DocuPrint C2100 User Manual page 76

Xerox printers user guide
Hide thumbs Also See for DocuPrint C2100:
Table of Contents

Advertisement

Item
Layout
Output Color
PCL
Specifies the settings for the PCL.
Item
Paper Tray
Output Size
Orientation
76
4 Setting on the Control Panel
Sets the output layout.
• [Auto %] (default)
Automatically selects the output size (A4, A5, B5, Legal, or Letter depending on the
size of the PDF file to be printed) and calculates the zoom ratio to print the file as
large as possible on the output paper. When none of the above size is detected,
automatically selects the output size set under [Default Paper Size].
• [100% (No Zoom)]
Prints a PDF file in its original size regardless of the output size.
• [Booklet]
Creates a booklet from a set of 2 sided documents. It correctly positions each page to
produce output, that when folded, will be ordered like a book.
Depending on the page structure, [Booklet] cannot be used and [Auto %] is used
instead.
When [Output Size] is [A4], the output size will be A4.
When [Output Size] is [Auto], the output size will be A4, A5, B5, Letter or Legal.
• [2 Pages Up]
Prints two pages onto one sheet of paper. When this is selected, the output size will
be the size set under [Default Paper Size].
• [4 Pages Up]
Prints four pages onto one sheet of paper. When this is selected, the output size will
be the size set under [Default Paper Size].
Note
• To use [Booklet] on the DocuPrint C2100, the optional duplex unit must be installed. If
the duplex unit is not installed, the printer only performs 1-sided printing.
Sets the output color.
• [Color (Auto)] (default)
Automatically determines the output color of each page. Pages that contain colors
other than black and white will be printed in color, and those that contain only black
and white will be printed in monochrome.
• [Black]
Prints documents in monochrome.
Specifies the paper tray to be used for printing.
• [Auto] (default)
The tray is selected automatically when print data is sent.
• [Tray 1]
• [Tray 2]
• [Bypass Tray]
Specifies the paper size to be printed.
• [A4] (default)
• [A5]
• [B5]
• [8.5 x 11]
• [8.5 x 13]
• [8.5 x 14]
• [7.25 x 10.5]
• [Env 3.9 x 7.5]
• [Env 110 x 220mm]
• [Env 162 x 229mm]
• [Env 4.1 x 9.5]
• [Custom Size]
The paper printing direction can be selected from [Portrait] and [Landscape]. The
default is [Portrait].
Description
Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint c3120 dx

Table of Contents