Xerox DocuPrint C2100 User Manual page 72

Item
Audio Tones
Time-Out
Auto Job History
Print ID
Print Text
Banner Sheet
72
4 Setting on the Control Panel
Specifies whether to turn on the alarm when an error occurs in the printer. You cannot
adjust the sound volume.
• [Control Panel] (default: [On])
• [Invalid Key] (default: [On])
• [Machine Ready] (default: [On])
• [Job Complete] (default: [On])
• [Fault Tone] (default: [On])
• [Alert Tone] (default: [On])
• [Out of Paper] (default: [On])
• [Low Toner Alert] (default: [On])
• [Base Tone] (default: [On])
You can cancel a printing process when it goes beyond a set time period. Set the time
until the print job is canceled. When this timeout expires, the print job is canceled.
• [5 sec] to [300 sec] (default: [30 sec])
Specifies the amount of time in increments of 1 second the printer waits for additional
data before it cancels the job.
• [Off]
Cannot cancel.
Specifies whether to automatically print information about the printed data that has
been processed in the printer ([Job History Report]).
• [Off] (default)
Select this if you do not want to print the [Job History Report] automatically even if the
number of print jobs exceeds 20.
• [On]
Automatically prints a report when the number of print jobs reaches 20.
Note
• You cannot set this during printing.
• You can print the [Job History Report] from the [Report / List] menu.
• You need to restart the printer to activate the new settings. After making the settings,
turn off the printer and then turn it on again.
Select this to print the user ID on a specified position.
• [Off] (default)
User ID is not printed.
• [Top Left]
Prints the user ID on the top left of the sheet of paper.
• [Top Right]
Prints the user ID on the top right of the sheet of paper.
• [Bottom Left]
Prints the user ID on the bottom left of the sheet of paper.
• [Bottom Right]
Prints the user ID on the bottom right of the sheet of paper.
Specifies whether the printer outputs PDL data, which is not supported by the printer, as
text when the printer receives it. Text data is printed on A4 or Letter size paper.
• [Off] (default)
Does not print the received data.
• [On]
Prints the received data as text data.
Specifies the settings for the banner sheet.
• [Insert Position] (default: [Off])
Selects the position to output the banner sheet from [Off], [Start Sheet], [End Sheet],
and [Start&End Sheet]. When [Off] is selected, the banner sheet is not printed.
• [Select Tray] (default: [Tray 1])
Specifies the tray from which the banner sheet is output: [Tray 1], [Tray 2], or [Bypass
Tray].
Note
• [Tray 2] is displayed only when the optional sheet feeder is installed.
Description