Color Scan; Original Paper Size And Type; Image Quality - Xerox DocuPrint C2090 FS Quick Reference Manual

Color scan

You can choose to scan an image or
a document either in B/W or color
mode.
When the green light of the <Color
Mode> button is on, the machine is
set to color mode. To change to
Mono mode, press the button again
and the light will go off.

Original paper size and type

To determine the original paper size
to scan, do the following:
1. In [Scan] mode, press the
<Menu> button on the control
panel. Use the < / > buttons to
select [Size/Type] function.
2. Choose [Original size] and press
the <Set> button to configure the
settings.
3. Choose the original size of the
document to scan.
Available document size:
• A4, A5, B5
• Postcard
• 8.5" x 11", 8.5" x 5.5"
• 10.5" x 7.25"
4. Press <Set> to confirm.
5. Press the < > button to return to
[READY] mode.
To determine the file type to scan, do
the following:
1. In [Scan] mode, press the
<Menu> button on the control
panel. Use the < / > buttons to
select [Size/Type] function.
2. Use the < / > buttons to choose
[Original type] and press <Set>.
3. Choose the original type of the
document to scan. You can scan
Scanning
31 -
from [Text file], [Text & Photo
file], and [No Filter].
4. Press <Set> to confirm your
choice.
5. Press the < > button to return to
[READY] mode.

Image quality

To configure the brightness of the
scanned images, do the following:
1. In [Scan] mode, press the
<Menu> button on the control
panel. Use the < / > buttons to
select [Image quality] function.
2. Press the < / > buttons to
choose to configure the settings
for brightness or scan resolution.
3. Choose [Brightness] and press
<Set> to confirm.
4. Use the < / > buttons to
increase the brightness of the
scan copy. And press the < >
button to decrease it.
5. Press the < > button to return to
[READY] mode.
To configure the scan resolution of
the scanned images, do the follow-
ing:
1. In [Scan] mode, press the
<Menu> button on the control
panel. Use the < / > buttons to
select [Image quality] function.
2. Press the < / > buttons to
choose to configure the settings
for brightness or scan resolution.
3. Choose [Scan resolution] and
press [Set] to confirm.
4. Use the < / > buttons to choose
scan resolution. You can set reso-
lution to 150 dpi, 300 dpi, 600 dpi,
or 1200 dpi.