Host Settings - Xerox DocuPrint C2090 FS Quick Reference Manual

Host settings

You can specify Host settings for
Ethernet, TCP/IP, Protocol, or IP
Filter under the host settings sub-
menu.
To specify the network setting
through ethernet connection, do the
following:
1. Press the <Menu> button on the
control panel. Use the < / >
buttons to select [Configuration
Need Password] and press
<Set>.
2. Use the < / > buttons to select
[Network Config - Network]
and press <Set>.
3. Use the < / > buttons to select
[Network Config - Ethernet]
and press <Set>.
4. Use the < / > buttons to select
[Auto select], [10Base Half],
[10Base Full], [100Base Half],
or [100Base Full].
5. Press <Set> to confirm.
57 - Advanced functions
To specify the TCP/IP setting, do the
following:
1. Press the <Menu> button on the
control panel. Use the < / >
buttons to select [Configuration
Need Password] and press
<Set>.
2. Use the < / > buttons to select
[Network Config - Network]
and press <Set>.
3. Use the < / > buttons to select
[Network Config - TCP/IP] and
press <Set>.
4. Use the < / > buttons to select
[IP Address], [Subnet Mask], or
[Gateway address].
5. Press <Set> to confirm.
To specify the protocol setting, do
the following:
1. Press the <Menu> button on the
control panel. Use the < / >
buttons to select [Configuration
Need Password] and press
<Set>.
2. Use the < / > buttons to select
[Network Config - Network]
and press <Set>.
3. Use the < / > buttons to select
[Network Config - Protocol]
and press <Set>.
4. Use the < / > buttons to select
[LPD] or [Port 9100] and press
<Set>.
5. Use the < / > buttons to turn
the option ON/OFF.
6. Press <Set> to confirm.