Table of Contents
Advertisement
Scanning to a Computer on a Network
If you haven't created a shared folder and an address for the printer to use, see
Computer
on page 7-118.
To scan to a computer on a network:
1.
On the control panel, click the Scan button.
2.
Use the Up Arrow to select
3.
Select
, and then press the OK button.
Scan to
4.
Press the Up Arrow or Down Arrow button to select the address that points to your computer, and
then press the OK button.
5.
If you want to change any other scan settings, press the Up Arrow or Down Arrow button to select the
setting and make your changes.
6.
Press the Start button.
The printer begins scanning your documents to the shared folder on your computer.
See also:
Adjusting Scanning Options
, and then press the OK button.
Computer (Network)
on page 7-130
7-122
Scanning to a Computer on a Network
Setting Up Scanning to a
Hide quick links:
Advertisement
Table of Contents
