Xerox DocuPrint C3290 FS User Manual page 202

Determining Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan) pattern, find the values of the
straightest lines.
When "0" is the value nearest the straightest line, you do not need to adjust the color registration. When the
value is not "0", follow the procedure outlined in "Entering Values".
Note:
You can also use the densest colors of the grid to find the straightest lines. The colors printed at the
highest density are those next to the straightest lines.
Entering Values
Using the control panel, enter the values that you found in the Color Registration Correction Chart to make
adjustments.
1. Press the System button to display the
2. Press the Up Arrow or Down Arrow button until
button.
3.
Press the Up Arrow or Down Arrow button until
button.
4. Press the Up Arrow or Down Arrow button until
button.
5.
Press the Up Arrow or Down Arrow button until
6. Select ,
Yellow Magenta
7. Press the Up Arrow or Down Arrow button until you reach the value displayed on the chart.
8.
Press the OK button, and move the cursor to the next value.
9. Repeat steps 6, 7, and 8 to continue adjusting the color registration.
10.
Press the Exit button, and then select
11. Press the OK button again.
The Color Registration Correction Chart is printed with the new values.
12.
Color registration adjustment is complete when the straightest Y (yellow), M (magenta), and C (cyan)
lines are next to the "0" line.
If "0" is not next to the straightest lines, determine the values and adjust again.
Note:
After printing the Color Registration Correction Chart, do not turn off the printer until the printer
motor has stopped running.
screen.
Setup
, or , and then press the OK button.
Cyan
Color Regi Chart
10-199
appears, and then press the OK
Admin Menu
appears, and then press the OK
Maintenance
appears, and then press the OK
Adjust Color Regi
Color Regi appears, and then press the OK button.
, and then press the OK button.
Print Quality