Xerox DocuPrint C3290 FS User Manual page 134

Setting the Scan Resolution
You may want to change the scan resolution depending on the way you plan to use the scanned image.
Scan resolution affects both the size and image quality of the scanned image file. The higher the scan
resolution, the larger the file size.
To select the scan resolution:
1. Press the System button.
2. Select
Default Settings
3.
Select
Scan Defaults
4. Select , and then press the OK button.
Resolution
5.
Select one of the following options, and then press the OK button:
■ : (factory default) Produces the lowest resolution and smallest file size.
150x150
■ 300x300 : Produces medium resolution and a medium file size.
■ : Produces high resolution and a large file size.
400x400
: Produces the highest resolution and largest file size.
■ 600x600
Setting the Original Type
You can optimize the appearance of the scanned output according to the type of information contained in
the original.
1. Press the System button.
2. Select
Default Settings
3. Select
Scan Defaults
4. Select
Document Type
5.
Select the type, and then press the OK button.
Available types include:
: Optimizes for black and white or colored text.
■ Text
■ : (factory default) Optimizes for combined text and photograph prints.
Mixed
■ Photo : Optimizes for photograph prints.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
7-131
Adjusting Scanning Options