Drum Cartridge Replacement - Xerox XC 800 Series User Manual

Xerox copier user guide
Table of Contents

Advertisement

Drum Cartridge Replacement

The useful life of the drum cartridge is approximately 12,000 copies. The
drum cartridge indicator on the copier diagram lights when the drum is near
the end of life. Copies can continue to be made, but you should have a
replacement cartridge in stock. After approximately 1,000 copies, the
Ready indicator will go out, the drum cartridge indicator will blink, and the
copier will stop operating until the drum cartridge is replaced.
Does not apply in some areas of Latin America.
2
1
1. Press the release lever to open the copier.
2. Press down on the green lever (1) on the
front of the toner cartridge and pull out the
cartridge (2).
Note: The toner cartridge must be removed
before removing the Drum Cartridge.
3. Pull out the drum cartridge.
Note: Help the environment by recycling
your used Drum Cartridge. Refer to the
Xerox Green Team brochure packed with the
Drum Cartridge for instructions on returning
the used Drum Cartridge to Xerox.
4. Remove the cover from the new Drum
Cartridge.
2. Slide the new Drum Cartridge in place,
making sure not to touch the surface of
the drum.
3. Reinstall the Toner Cartridge.
4. Close the copier by gently pushing down
the upper half.
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc1000 seriesXc1200 series

Table of Contents