Xerox XC 800 Series User Manual page 45

Xerox copier user guide
Table of Contents

Advertisement

Condition
Image rubs off
the copy easily.
Frequent copy
paper jams.
The three trouble
indicators are lit
in the copier
diagram.
Toner yield is
lower than
expected and the
Toner Indicator is
on.
Fewer copies
from the Toner
Cartridge than
expected.
Suggested solutions
Replace the paper in the tray with paper from
a new package.
In high humidity areas do not leave paper in
the copier for extended periods of time.
Fan the stack of paper, then turn it over in the
tray.
Replace paper in paper tray with a fresh
supply.
Check/adjust paper guides.
Ensure that the paper is the proper paper
weight. 20 lb / 80 gsm bond paper is
recommended.
Check for copy paper or pieces of copy paper
remaining in the copier after a paper jam has
been cleared. (Refer to Clearing the Paper
Path.)
The machine is in the program mode. Press
the Exposure mode key to exit.
Toner may be lodged in the cartridge.
Remove the toner cartridge. Shake the toner
cartridge and tap along the top of the toner
cartridge over a waste receptacle. Take care
not to touch the exposed toner on the left side
of the cartridge.
Originals contain pictures, solids, or heavy
lines.
Originals are forms, newsletters, books etc.
The copier is being turned on and off
frequently.
The document cover is being left open while
copies are being made. (Refer to the Toner
Cartridge Yield section.)
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc1000 seriesXc1200 series

Table of Contents