Flashing - Xerox XC 800 Series User Manual

Loading Copy Paper

Flashing

When the Alternate Paper Tray runs out of paper, or the paper misfeeds,
the P will flash in the display and the green indicator in the copier diagram
will flash.
Alternate Paper Tray (XC810/ XC1040/ XC1045)
5. Adjust the paper guides to the desired
paper size.
Squeeze the side guide.
•
Lift and insert the rear guide.
•
When adding 14" paper, remove the
•
rear guide and store it in the pocket in
front of the side guide.
4. Fan the copy paper and insert it into the
tray.
Ensure that the paper corners are under
•
the corner snubbers.
Do not fill above the max fill line.
•
5. Close the Paper Tray.
6. To cancel the blinking P without restarting
copying, press the Clear button, or press
Start to continue copying.
1. Add paper if the Alternate Paper Tray is
empty.
1. If paper has misfed, remove it by carefully
pulling the edge of the paper in direction
of the arrow.
2. Press Start to continue copying.
17