Administrator's Handbook
About SHELL Commands
You begin in SHELL mode when you start a CLI session. SHELL mode lets you perform the following
tasks with your Motorola Netopia
◆
Monitor its performance
◆
Display and reset Gateway statistics
◆
Issue administrative commands to restart Motorola Netopia® Gateway functions
SHELL Prompt
When you are in SHELL mode, the CLI prompt is the name of the Motorola Netopia® Gateway followed
by a right angle bracket (>). For example, if you open a CLI connection to the Motorola Netopia® Gate-
way named "Netopia-3000/9437188," you would see
SHELL Command Shortcuts
You can truncate most commands in the CLI to their shortest unique string. For example, you can use
the truncated command
rese
to enter
for the
command.
The only commands you cannot truncate are
communications, you must enter the
You can use the Up and Down arrow keys to scroll backward and forward through recent commands you
have entered. Alternatively, you can use the
128
®
Gateway:
q
in place of the full
reset
command, since the first characters of
restart
restart
!!
Netopia-3000/9437188>
quit
command to exit the CLI. However, you would need
reset
clear
and
. To prevent accidental interruption of
clear
and
commands in their entirety.
command to repeat the last command you entered.
as your CLI prompt.
restart
are common to the