Vlan Settings - Motorola Netopia 2200 Administrator's Handbook

Administrator's Handbook

VLAN Settings

You can create up to 8 VLANs, and you can also restrict any VLAN, and the computers on it, from admin-
istering the Gateway. See "VLAN" on page 74 for more information.
set vlan name name
Sets the descriptive name for the VLAN. If no name is specified, displays a selection list of node names
to select for editing. Once a new VLAN name is specified, presents the list of VLAN characteristics to
define.
set vlan name name type [ by-port | global ]
Specifies VLAN type: by-port or global. Default is by-port.
set vlan name name id VID
Specifies VLAN id (VID), when type is set to global. The numerical range of possible VIDs is 1 - 4094.
(A VID of zero (0) is permitted on the Ethernet WAN port only.)
set vlan name name admin-restricted [ off | on ]
Turns admin-restricted off or on. Default is off. If you select on, administrative access to the Gate-
way is blocked from the specified VLAN.
set vlan name name seg-pbits [ 0 - 7 ]
Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this VLAN with
unmarked priority bits (pbits) will be re-marked to this priority.
set vlan name name ports port option [ off | on ]
Enables or disables the Gateway's physical Ethernet, USB or VCC port or wireless SSID for the speci-
fied VLAN.
set vlan name name ports port tag [ off | on ]
If set to on, packets transmitted from this port through this VLAN must be tagged with the VLAN VID.
Packets received through this port destined for this VLAN must be tagged with the VLAN VID by the
source. The tag option is only available on global type ports.
set vlan name name ports port priority [ off | on ]
Enables or disables the priority for the port assigned to the specified VLAN allowing packet prioritiza-
tion based on any 802.1p priority bits in the VLAN header to prioritize packets within the Gateway's
internal queues, according to DiffServ priority mapping rules.
set vlan name name ports port promote [ off | on ]
Enables or disables the promote setting allowing writing any 802.1p priority bits into the IP-TOS header
bit field for received IP packets on this port destined for this VLAN. Write any IP-TOS priority bits into the
216