Motorola Netopia 2200 Administrator's Handbook page 200

Administrator's Handbook
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
dst-compare [ nc | ne | lt | le | eq | gt | ge ]
Sets the destination compare operator action for the specified filter rule. dst-compare only displays
when the protocol is TCP or UDP.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
src-port value
Specifies the source IP port to match packets (the port on the sending host that originated the packet,
if the underlying protocol is TCP or UDP). src-port does not display if nc is set for src-compare or dst-
compare.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
dst-port value
Specifies the destination IP port to match packets (the port on the receiving host that the packet is
destined for, if the underlying protocol is TCP or UDP). dst-port does not display if nc is set for src-
compare or dst-compare.
set security pkt-filter interface
assigned-filterset filterset-name
Associates a filterset with a LAN or WAN interface.
Example:
set security pkt-filter ethernet A assigned-filterset set1
200
Operator Action
nc No compare
ne Not equal to
lt Less than
le Less than or equal to
eq Equal to
ge Greater than or equal to
gt Greater than