Motorola Netopia 2200 Administrator's Handbook page 150

Administrator's Handbook
set dhcp range [ 2... 8 ] start-address ip_address
Specifies the starting IP address of DHCP range n when subnet n option is on. See
nets" on page 164.
set dhcp range [ 2... 8 ] end-address ip_address
Specifies the ending IP address of DHCP range n when subnet n option is on. See
nets" on page 164.
set dhcp reserved ip-address x.x.x.x mac-address y-y-y-y-y-y
If you selected server
address. These are list items; a total of 16 reserved addresses are supported. Secondary ranges will
all make use of the
DHCP Generic Options
Beginning with Firmware Version 7.7.2, you can specify DHCP Generic Options which allow you to config-
ure the content to be served for particular option numbers.
set dhcp gen-option name name
Specifies a DHCP generic option set named name of one to 15 characters. You can specify up to 20
gen-options. Each can contain up to 100 bytes of data, up to a maximum of 912 bytes of options data
total. An option will be served only if the client requests it.
set dhcp gen-option option [ 1 – 255 ]
Specifies the DHCP option by number, 1 – 255. The following table shows the formats and sizes for
known options, and whether or not you can configure a gen-option of that type.
Option
0
1
2
3 - 11
12
13
14 - 15
16
17
18
19 - 20
21
22
23
150
, reserves the specified IP address from the DHCP pool to the specified MAC
dhcp lease-time value.
Data Format
Empty
IP mask
Unsigned 4 byte integer
IP address list
String (up to 100 characters)
Unsigned 2 byte integer
String (up to 100 characters)
Unsigned 4 byte integer
String (up to 100 characters)
String (up to 100 characters)
Flag
IP address & mask list
Unsigned 2 byte integer
Unsigned 1 byte integer
"Additional sub-
"Additional sub-
Data Size Can
(bytes) Configure
0 No
4 Yes
4 Yes
Multiples of 4 Yes
N Yes
2 Yes
N Yes
4 Yes
N Yes
N Yes
1 Yes
Multiples of 8 Yes
2 Yes
1 Yes