Motorola Netopia 2200 Administrator's Handbook page 214

Motorola router administrator’s handbook
Hide thumbs Also See for Netopia 2200:
Table of Contents

Advertisement

Administrator's Handbook
set wireless network-id privacy encryption-key1-length
{40/64bit, 128bit, 256bit}
set wireless network-id privacy encryption-key2-length
{40/64bit, 128bit, 256bit}
set wireless network-id privacy encryption-key3-length
{40/64bit, 128bit, 256bit}
set wireless network-id privacy encryption-key4-length
{40/64bit, 128bit, 256bit}
Selects the length of each encryption key. 40bit encryption is equivalent to 64bit encryption. The
longer the key, the stronger the encryption and the more difficult it is to break the encryption.
set wireless network-id privacy encryption-key1 { hexadecimal digits }
set wireless network-id privacy encryption-key2 { hexadecimal digits }
set wireless network-id privacy encryption-key3 { hexadecimal digits }
set wireless network-id privacy encryption-key4 { hexadecimal digits }
The encryption keys. Enter keys using hexadecimal digits. For 40/64bit encryption, you need 10 digits;
26 digits for 128bit, and 58 digits for 256bit WEP. Valid hexadecimal characters are 0 – 9, a – f.
Example 40bit key: 02468ACE02.
Example 128bit key: 0123456789ABCDEF0123456789.
Example 256bit key: 592CA140F0A238B0C61AE162F592CA140F0A238B0C61AE162F21A09C.
You must set at least one of these keys, indicated by the default-keyid.
Wireless MAC Address Authorization Settings
set wireless mac-auth option { on | off }
Enabling this feature limits the MAC addresses that are allowed to access the LAN as well as the WAN
to specified MAC (hardware) addresses.
set wireless mac-auth wrlss-MAC-list mac-address MAC-address_string
Enters a new MAC address into the MAC address authorization table. The format for an Ethernet MAC
address is six hexadecimal values between 00 and FF inclusive separated by colons or dashes [e.g.,
00:00:C5:70:00:04).
set wireless mac-auth wrlss-MAC-list mac-address
" MAC-address_string " allow-access { on | off }
Designates whether the MAC address is enabled or not for wireless network access. Disabled MAC
addresses cannot be used for access until enabled.
set wireless multi-ssid second-ssid-macauth { off | on }
set wireless multi-ssid third-ssid-macauth { off | on }
set wireless multi-ssid fourth-ssid-macauth { off | on }
Enables or disables MAC authorization for the specified SSID.
214

Advertisement

Table of Contents
loading

Table of Contents