Motorola Netopia 2200 Administrator's Handbook page 130

Administrator's Handbook
◆
The
server_address
to copy the Motorola Netopia® Gateway configuration file.
◆
The filename argument identifies the path and name of the configuration file on the TFTP server.
◆
If you include the optional
entered.
You can also download an SSL certificate file from a trusted Certification Authority (CA), on platforms
that support SSL, as follows:
download [-cert] [ server_address ] [ filename ] [confirm]
install [ server_address ] [ filename ] [confirm]
Downloads a new version of the Motorola Netopia® Gateway operating software from a TFTP (Trivial File
Transfer Protocol) server, validates the software image, and programs the image into the Motorola
Netopia® Gateway memory. After you install new operating software, you must restart the Motorola
Netopia® Gateway.
The server_address argument identifies the IP address of the TFTP server on which your Motorola
Netopia® Gateway operating software is stored. The filename argument identifies the path and name
of the operating software file on the TFTP server.
If you include the optional keyword confirm , you will not be prompted to confirm whether or not you
want to perform the operation.
log message_string
Adds the message in the message_string argument to the Motorola Netopia® Gateway diagnostic
log.
loglevel [ level ]
Displays or modifies the types of log messages you want the Motorola Netopia® Gateway to record. If
you enter the loglevel
displays the current log level setting.
You can enter the loglevel
messages you want to record. All messages with a level number equal to or greater than the level you
specify are recorded. For example, if you specify loglevel 3, the diagnostic log will retain high-level infor-
mational messages (level 3), warnings (level 4), and failure messages (level 5).
Use the following values for the level argument:
◆
1 or low – Low-level informational messages or greater; includes trivial status messages.
◆
2 or medium – Medium-level informational messages or greater; includes status messages that
can help monitor network traffic.
◆
3 or high – High-level informational messages or greater; includes status messages that may be
significant but do not constitute errors.
◆
4 or warning
information.
◆
5 or failure –
able.
130
argument identifies the IP address of the TFTP server from which you want
confirm
keyword, the download begins as soon as all information is
command without the optional level argument, the command line interface
command with the level argument to specify the types of diagnostic
– Warnings or greater; includes recoverable error conditions and useful operator
Failures; includes messages describing error conditions that may not be recover-