Advanced1" Menu - Epson EMP-7800 User Manual

Using the Configuration Menu Functions Using the Configuration Menu Functions

"Advanced1" Menu

Video
Startup Screen
Audio
Progressive
Effect Color Adjustment
Setting
User's Logo
Rear Proj.
Advanced1
Ceiling
Advanced2
Standby Mode
About Language
Reset All
Reset
[ ]: Select [ ]: Enter
:
ON OFF
:
OFF Video Film/Auto
:
Color Temp. RGB Adjust
:
ON OFF
:
ON OFF
:
Network ON Network OFF
Select [English]
Execute
[Menu]: Exit
Sub-menu
Startup Sets whether the startup screen is displayed or not.
Screen To change the user's logo, you need to record your own
logo. p.132
When this setting is changed, turn the power off, and when
the cool-down period has finished, turn the power back on
again. The new setting will be applied after the power turns
back on.
Progressive (Setting is only possible when composite video, S-Video or
component video (525i, 625i) signals are being input)
Converts interlaced
When set to "OFF", interlaced signals are projected without
conversion.
•OFF : IP conversion is carried out for each field
window. This is ideal for images with a lot of
movement.
•Video : The film judgment function
•Film/Auto : This setting is for normal use. The source is
automatically judged to be a video source or
not, and if it is a video source, the
down function
reproduced as film images with no loss in
colour from the original.
Function
(i) signals to progressive (p) signals.
is turned off.
3-2 pull-
operates and the images are
85
Default
ON
Film/Auto