Epson EMP-7800 User Manual page 88

Using the Configuration Menu Functions Using the Configuration Menu Functions
Sub-menu
Standby Set to "Network ON" to use network monitoring and
Mode control functions and the standby monitor out function
while the projector is in standby mode.
When this setting is changed, turn the power off, and when
the cool-down period has finished, turn the power back on
again. The new setting will be applied after the power is
turned back on.
Language Sets the language for message displays.
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel and
choose the setting.
Reset Resets all adjustments values for the "Advanced1" menu
functions except for the "Rear Proj.", "Ceiling" and
"Language" settings to their default settings.
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel to
reset.
•Select "Reset All" to reset all menu settings – including
settings for the "Video" and "Audio" menus – to their
default settings.
Function
p.91
87
Default
Network OFF
English
-