Epson EMP-7800 User Manual page 106

Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
Select the projector to be monitored or controlled and
4
then click [Add].
Selected projector name
If there are other projectors that you would like to
5
monitor that need to be added, repeat step 4.
Once all new projectors to be monitored have been
6
added, click [Close].
The display will return to the Register projector window, and
the names of the added projectors will appear in the projector
list.
: Projectors registered using the Manual registration function
: Projectors registered using the Auto detect function
Once all target projectors have been registered, click
7
[Close].
If there are any projectors in the list that you do not need to
monitor, select the Projector name and then click [Delete].
TIP
If the IP addresses for projectors that have been registered using the
Manual registration function have changed, you can select the
Projector name and then click [Edit] to change the IP address. [Edit]
cannot be used for projectors that have been registered using the Auto
detect function.
105