If The Monitor Port Is A 13W3 Port - Epson EMP-7800 User Manual

Connecting to a Computer

If the Monitor Port is a 13w3 Port

Some workstation-type computers have a 13w3 monitor port.
In such cases, use a commercially-available 13w3 ⇔ D-Sub 15-pin cable
to make the connection.
To monitor port
13w3 cable
(commercially-available)
To [Computer] port (blue)
TIP
• After projection starts, change the "Computer Input" setting in the
"Setting" menu to "Analog-RGB".
• If more than one external component is connected to the projector,
press the [Comp] button on the remote control after projection starts,
or repeatedly press the [Computer/DVI] button on the projector's
control panel until "Computer (Analog-RGB)" is displayed on the
projected image to select the signal to be projected.
• Some workstations may require a special cable. Consult the
workstation manufacturer for further details.
19
p.83
p.35