Advanced1" Menu - Epson EMP-7950 User Manual

Using the Configuration Menu Functions Using the Configuration Menu Functions

"Advanced1" Menu

Video
Startup Screen
Audio
Progressive
Effect Color Adjustment
Setting
User's Logo
Rear Proj.
Advanced1
Ceiling
Advanced2
Standby Mode
About Language
Reset All
Reset
[ ]: Select [ ]: Enter
:
ON OFF
:
OFF Video Film/Auto
:
Color Temp. RGB Adjust
:
ON OFF
:
ON OFF
:
Network ON Network OFF
Select [English]
Execute
[Menu]: Exit
Sub-menu
Startup Sets whether the startup screen is displayed or not.
Screen To change the user's logo, you need to record your own
logo. p.148
•When this setting is changed, turn the power off, and when
the cool-downg period has finished, turn the power back
on again. The new setting will be applied after the power
turns back on.
•This cannot be changed between enabled ("ON") and
disabled ("OFF") if the "User's Logo Protect" function of
Password Protect has been set to "ON". Set "User's Logo
Protect" to "OFF" and then save the new user's logo.
p.61
Progressive (Setting is only possible when composite video, S-Video or
component video (525i, 625i) signals are being input)
Converts interlacedg
When set to "OFF", interlaced signals are projected without
conversion.
•OFF : IP conversion is carried out for each field
window. This is ideal for images with a lot of
movement.
•Video : The film judgment functiong
•Film/Auto : This setting is for normal use. The source is
automatically judged to be a video source or
not, and if it is a video source, the
down functiong
reproduced as film images with no loss in
colour from the original.
Function
(i) signals to progressiveg (p) signals.
is turned off.
3-2 pull-
operates and the images are
User's Guide
89
Default
ON
Film/Auto