Epson EMP-7800 User Manual page 108

Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The power for all registered projectors can be turned
9
on and off at the same time, and the input signal for
all projectors can also be selected at the same time.
Select the projectors for which the operation is to be
carried out and then click the desired operation
button.
If you would like to select all projectors, click [Select All].
Furthermore, you can also use the same operations as selecting
files in Windows to select ranges of projectors; for example,
click the first projector in the range, and then while pressing
down the [Shift] key on the keyboard, click the last projector in
the range to select all projectors within the specified range. If
you hold down the [Ctrl] key, projectors can be selected and
unselected each time the projector name is clicked.
The following table shows the function of each button.
[View details] button Shows the detailed information for the selected
projectors.
Power ON Turns the power on for the selected projectors.
Power OFF Turns the power off for the selected projectors.
Computer
Changes the input source to the [Computer] port.
BNC Changes the input source to the [BNC] port.
S-Video Changes the input source to the [S-Video] port.
Video Changes the input source to the [Video] port.
DVI Changes the input source to the [DVI] port.
To close EMP Monitor, select [Exit] from the [File]
10
menu, or click [ ] in the top-right corner of the
window.
107