Advanced1" Menu - Epson EMP-7850 User Manual

Using the Configuration Menu Functions Using the Configuration Menu Functions

"Advanced1" Menu

Video Video
Star Startup Screen tup Screen
Audio udio
Prog Progressiv ressive
Effect Eff ect
Color Adjustment Color Adjustment
Setting Setting
User's Logo User's Logo
Rear Proj. Rear Proj.
Adv Advanced1 anced1 Ceiling Ceiling
Adv Advanced2 anced2
Standby Mode Standb y Mode
About About Language Language
Reset All Reset All
Reset Reset
[ ]: Select [ ]: Enter
:
ON OFF ON OFF
:
ON OFF ON OFF
:
Color Temp Color emp. RGB RGB Adjust Adjust
:
ON ON OFF OFF
:
ON OFF ON OFF
:
Netw Networ ork ON k ON Networ ork OFF Netw k OFF
Select Select [English] [English]
Ex Execute ecute
[Menu]: Exit [Men Exit
Sub-menu
Startup Sets whether the startup screen is displayed or not.
Screen To change the user's logo, you need to record your own
logo. p.126
When this setting is changed, turn the power off, and when
the cool-down period has finished, turn the power back on
again. The new setting will be applied after the power turns
back on.
Progressive (Setting is only possible when composite video, S-Video or
component video (525i, 625i) signals are being input)
Converts interlaced
When set to "OFF", interlaced signals are projected without
conversion.
•OFF : IP conversion is carried out for each field
window. This is ideal for images with a lot of
movement.
•Video : The film judgment function
•Film/Auto : This setting is for normal use. The source is
automatically judged to be a video source or
not, and if it is a video source, the
down function
reproduced as film images with no loss in
colour from the original.
Function
(i) signals to progressive (p) signals.
is turned off.
3-2 pull-
operates and the images are
EMP-7850 User's Guide
86
Default
ON
Film/Auto