Advanced Setup > Security > Ip Filtering; Outgoing Ip Filtering - NetComm NB7 Series User Manual

Advanced Setup > Security
Advanced Setup > Security > IP Filtering
The router supports IP Filtering which allows you to easily set up rules to control incoming and outgoing Internet
traffic. The router provides two types of IP filtering: Outgoing IP Filtering and Incoming IP Filtering.

Outgoing IP Filtering

By default, the router allows all outgoing Internet traffic from the LAN but by setting up Outgoing IP Filtering rules,
you can block some users and/or applications from accessing the Internet.
To create a new outgoing IP filter, click Add. The Add IP Filter-Outgoing page will be displayed.
Key in the following parameters:
Filter Name
Protocol
Source IP Address/Subnet Mask
Source Port
Destination IP Address/Subnet Mask
Destination Port
Click Save/Apply to take effect the settings. The new rule will then be displayed in the Outgoing IP Filtering table list.
To delete the rule, click Remove checkbox next to the selected rule, and click Remove.
NB7 Series User Guide
0
Key in the name of the filter rule.
Select the IP protocol to block.
Enter the IP address of the PC on the LAN to block.
Enter the port number used by the application to block.
Enter the IP address of the remote server to which connection should be blocked.
Enter the destination port number used by the application to block.
YML901 Rev1
www.netcomm.com.au