Router Front Panel - NETGEAR MBR1210 User Manual

Router Front Panel

The router front panel contains control buttons and status LEDs. Use the LEDs to verify
status and connections.
Figure 2.
describes each LED and button located on the front panel of the router.
Table 1
Table 1. LED Descriptions
LED Activity
WPS Press the WPS button to open a 2-minute window for the router to connect with other
WPS-enabled devices. For more information about this function, see
(WPS) to Configure Your Wireless Network
Wi-Fi This button can be used to control the WiFi radio or both the WiFi radio and mobile broadband
radio. Use the router interface to select the options. The default is set for Wi-Fi radio only.
8 | Chapter 1. Connecting to the Internet
Mobile Broadband 11n Wireless Router MBR1210 User Manual
WPS
Mobile Broadband/Wi-Fi On/Off
Power
Internet
Wi-Fi
LAN
Ethernet WAN
2G/3G
Signal Quality
Description
on page 31.
Use Push 'N' Connect