Configuring Wep - NETGEAR MBR1210 User Manual

Table 6.
Settings
Security Options None
WEP
WPA-PSK (TKIP)
WPA2-PSK (AES)
WPA-PSK (TKIP) +
WPA2-PSK (AES)

Configuring WEP

If you use a wireless computer to configure wireless security
Note:
settings, you will be disconnected when you click Apply.
Reconfigure your wireless computer to match the new settings, or
access the router from a wired computer to make further changes.
To configure WEP data encryption:
Log in to the router as described in
1.
From the main menu, select Wireless Settings to display the Wireless Settings screen.
2.
28 | Chapter 2. Wireless Network Configuration
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Description
Use this setting to establish wireless connectivity before
implementing wireless security. NETGEAR strongly recommends that
you implement wireless security.
Use encryption keys and data encryption for data security. You can
select 64-bit or 128-bit encryption. See
Allow only computers configured with WPA to connect to the router.
See
Configuring WPA, WPA2, or WPA + WPA2
Allow only computers configured with WPA2 to connect to the router.
See
Configuring WPA, WPA2, or WPA + WPA2
Allow computers configured with either WPA-PSK or WPA2-PSK
security to connect to the router. See
on page 30.
WPA + WPA2
Log In to Your Router
on page 28.
Configuring WEP
on page 30.
on page 30.
Configuring WPA, WPA2, or
on page 11.