NETGEAR MBR1210 User Manual page 15

Mobile Broadband 11n Wireless Router MBR1210 User Manual
Adjust the settings as needed based on your Internet connection. The fields in this screen
3.
are described in
The following buttons are available:
4.
Apply. Apply the changes that you made.
•
Cancel. Discard changes.
•
Table 2. Internet Connection Settings
Fields and Check Boxes
Internet Connection Mode
Failover Detection Method
1
Retry Interval is
1
Failover after
1
Resume after
Enable Hardware link detection
1 This field is available only when the Internet Connection Mode is Use Ethernet first and if fail use 3G mobile
connection.
Table 2.
Description
The choices are:
• Always use an Ethernet connection (default)
• Use Ethernet first and if it fails use mobile broadband connection
• Always use mobile broadband connection
1
Select the failover method and enter the related information:
• DNS lookup using WAN DNS Server
• Perform a DNS lookup by a hostname
• Ping this IP address
Enter the retry interval.
Enter how many retry attempts to make before failing over.
Enter how long to wait for primary link is stabilized before resuming to
use the primary link.
Enter when to failover when the Ethernet link is dropped. This is
independent of the DNS / Ping detection methods.
Chapter 1. Connecting to the Internet | 15