NETGEAR MBR1210 User Manual page 12

If the router has not been configured, the Smart Wizard screen displays. After the router has
3.
been configured, one of the following screens appears:
Firmware Upgrade Assistant screen. After initial setup, the Firmware Upgrade
•
Assistant screen displays unless the Check for Updated Firmware Upon Log-in
check box is cleared.
You can disable this automatic checking and updating feature during
Note:
future log ins by clearing the Check for Updated Firmware Upon
Log-in check box, but NETGEAR recommends that you keep this
feature enabled to ensure your router is using the latest updated
firmware.
Router Status screen. The Router Status screen displays the current router
•
connection status. See
You can use different methods to configure your router.
4.
Select Setup Wizard from the router menu to set up your Internet connection and
•
wireless network configuration. See
Installation
You can manually configure the router settings. See
•
on page 14.
Settings
12 | Chapter 1. Connecting to the Internet
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Router Status
on page 13.
on page 47.
Access the Configuration Assistant after
Manually Configure Your Internet