Advanced Wireless Settings - NETGEAR MBR1210 User Manual

Advanced Wireless Settings

From the main menu, select Advanced Wireless Settings to display the following screen:
Table 13.
Field
Enable Wireless Router Radio
Fragmentation Length, CTS/RTS
Threshold, and Preamble Mode
Router PIN
Disable Router PIN
Keep Wireless Settings
Turn Access Control On
60 | Chapter 5. Advanced
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Description
Selected by default, this setting enables the wireless radio, which
allows the router to work as a wireless access point.
Turning off the wireless radio can be helpful for configuration,
network tuning, or troubleshooting.
These should be left at their default settings.
The PIN number used for Push 'N' Connect.
By default, this check box is cleared. This allows the WPS clients to
discover the router's PIN.
By default, this check box is cleared. This allows the router to
automatically generate the SSID and WPA/WPA2 security settings
when it implements WPS. After WPS is implemented, the router
automatically selects the Keep Existing Wireless Settings check
box so that your SSID and wireless security settings remain the
same if other WPS-enabled devices are added later.
Access control is disabled by default so that any computer
configured with the correct SSID can connect. See
on page 61.
Access by MAC Address
Restricting