Table of Contents
Advertisement
The Router's Front Panel
The front panel of the WPNT834 router contains the status lights described below.
1
2
Figure 2-1
You can use the status lights to verify connections. Viewed from left to right, the table below
describes the lights on the front panel of the router.
Table 2-1. Status Light Descriptions
Item
Function Activity
1
Power
On Blue Solid
Off
2
Test
On
Off
Slow blinking
3
Wireless
On
Off
Blinking
4
Internet
Amber Off
Port
Amber On
Amber blinking
Green off
Green on
Blink
5
LAN Ports Green
Amber
Introduction
Reference Manual for the RangeMax 240 Wireless Router WPNT834
3
4
Description
Power is supplied to the router.
Power is not supplied to the router.
The router is performing its power-on self-test diagnostic.
The router successfully completed its power on self test diagnostic.
Reset button is being pushed, restoring the factory default settings.
The wireless interface is enabled.
The wireless interface is turned off.
Data is being communicated over the wireless network.
No Ethernet cable is connected to the modem.
Ethernet cable connection to modem is good.
Packets are being transmitted and received from a modem or other
network device, but no IP address has been received.
No IP address received.
IP address received.
IP address received and data is being transmitted and received.
The LAN port has detected a 100 Mbps link with an attached device.
The LAN port has detected a 10 Mbps link with an attached device
v1.1, January 2006
5
2-7
Advertisement
Table of Contents
