NETGEAR MBR1210 User Manual page 32

The router WPS screen displays a
message confirming that the client was
added to the wireless network. The router
generates an SSID, and implements
WPA/WPA2 wireless security. The router
will keep these wireless settings unless
you change them, or you clear the Keep
Existing Wireless Settings check box in
the Advanced Wireless Settings/WPS
Settings screen.
Note the new SSID and WPA/WPA2
6.
password for the wireless network. You can
view these settings in the Wireless Settings
screen. See
Manually Configure Your
Wireless Settings
To access the Internet from any computer connected to your router, launch a browser such
as Microsoft Internet Explorer or Mozilla Firefox. You should see the router's Internet LED
blink, indicating communication to the ISP.
If no WPS-capable client devices are located during the 2-minute
Note:
time frame, the SSID does not change, and no security is set up.
32 | Chapter 2. Wireless Network Configuration
Mobile Broadband 11n Wireless Router MBR1210 User Manual
on page 27.