Ethernet Broadband Settings - NETGEAR MBR1210 User Manual

Ethernet Broadband Settings

To manually configure your Ethernet Broadband Internet settings:
Log in to the router as described in
1.
From the main menu, select Ethernet Broadband Settings.
2.
The following question displays at the top of the screen:
Select the option based on the type of account you have with your ISP.
If you need to enter login information every time you connect to the Internet, or you
•
have a PPPoE account with your ISP, select Yes.
Otherwise, select No.
•
Then fill out the appropriate screen.
For details, see:
step a, Login required
or
step b, Login not required
If you have installed PPP software such as WinPoET (from
Note:
Earthlink) or Enternet (from PacBell), then you have PPPoE. Select
Yes. After selecting Yes and configuring your router, you do not
need to run the PPP software on your PC to connect to the Internet.
18 | Chapter 1. Connecting to the Internet
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Log In to Your Router
on page 19
on page 21.
on page 11.