NETGEAR MBR1210 User Manual page 48

Mobile broadband 11n wireless router
Hide thumbs Also See for MBR1210:
Table of Contents

Advertisement

Table 9.
Field
Firmware Version
Mobile Broadband
WAN Port
LAN Port
Wireless Port
(See
Manually
Configure Your
on
Wireless Settings
page 27.
48 |
Chapter 4. Managing Your Network
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Description
This field displays the router firmware version.
Modem Identity
Shows the modem in use.
Modem sw version
The software version of the modem.
Modem driver
The driver version of the modem.
version
IMSI
International Mobile Subscriber Identity. SIM card identity.
IMEI
International Mobile Equipment Identity.
Unique identity of the modem.
Operator
The ISP for the broadband wireless network.
Network mode
The mode of the current network the modem is connected to.
This is dependent on coverage and distance from the cell site.
Connection Status
The status of the Internet connection.
IP Address
The IP address used by the modem. If no address is shown,
the router cannot connect to the Internet.
Protocol
The protocol for the Internet connection, which is PPP
(Point-to-Point).
IP Subnet Mask
The IP subnet mask used by the router's USB port.
Gateway IP Address The IP address used by the router.
Domain Name
The DNS server IP addresses used by the router. These
Server
addresses are usually obtained dynamically from the ISP.
MAC Address
The Ethernet MAC address used by the router's LAN port.
IP Address
The LAN port IP address. The default is 192.168.1.1.
DHCP
• Off. The router does not assign IP addresses to PCs on the
LAN.
• On. The router assigns IP addresses to PCs on the LAN.
IP Subnet Mask
The LAN port IP subnet mask. The default is 255.255.255.0.
Name (SSID)
The service set ID, also known as the wireless network name.
Region
The country where the unit is set up for use.
Channel
The current channel, which determines the operating
frequency.
Wireless AP
Indicates if the access point feature is disabled or not. If not
enabled, the Wireless LED on the front panel will be off.
Broadcast Name
Indicates if the router is configured to broadcast its SSID.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents