Configuring Wpa, Wpa2, Or Wpa + Wpa2 - NETGEAR MBR1210 User Manual

Configuring WPA, WPA2, or WPA + WPA2

Both WPA and WPA2 provide strong data security. WPA with TKIP is a software
implementation that can be used on Windows systems with Service Pack 2 or later; WPA2
with AES is a hardware implementation; see your device documentation before implementing
it. Consult the product documentation for your wireless adapter for instructions for configuring
WPA settings.
If you use a wireless computer to configure wireless security
Note:
settings, you will be disconnected when you click Apply. If this
happens, reconfigure your wireless computer to match the new
settings, or access the router from a wired computer to make further
changes.
To configure WPA or WPA2 in the router:
Log in to the router as described in
1.
Select Wireless Settings from the main menu.
2.
On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your
3.
choice.
For WPA-PSK or WPA2-PSK, enter the passphrase.
4.
To save your settings, click Apply.
5.
30 | Chapter 2. Wireless Network Configuration
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Log In to Your Router
on page 11.