Switching Between External Dc Power Supply And Battery Power Supply - Panasonic VARICAM LT Operating Manual

Hide thumbs Also See for VARICAM LT:
Table of Contents

Advertisement

Switching between external DC power supply and battery power supply

Status for both the battery power supply and the external DC power supply are monitored within the camera. Status of each power supply can be
confirmed in the control panel and the indicator. (page 67)
The external DC power supply is prioritized. It will automatically switch to the battery power supply when both the battery power supply and the external
DC power supply are connected and the indicator on the side of the external DC power supply goes under the remaining charge level near end is
displayed.
Once it is switched, the voltage display will display slightly higher voltage value due to less load on the external DC power supply.
It will be as follows when the external DC power supply is connected when only the battery power supply is in use.
f It will continue to use the battery power supply when the indicator on the side of the external DC power supply is displaying the remaining charge level
near end.
f It will switch to the external DC power supply when the indicator on the side of the external DC power supply is displayed with the power supply
voltage.
Chapter 3 Preparation — Power supply
– 28 –

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents